Home Duplex Steel Products – Duplex Steel S32205 Sheets, Plates & Coils

Duplex Steel S32205 Sheets, Plates & Coils

Duplex Steel S32205 Sheets, Plates & Coils

Duplex steel S32205 Sheets, Plates, and Coils are offered in hot and cold rolled forms. Large rolls are provided separately and wrapped in plastic to prevent oxidation and moisture while shipping. This alloy was expertly made by fusing austenitic and ferritic stainless steels, and it has exceptional qualities, including resistance to corrosion in cyclic and mild conditions. Compared to the nitrogen alloy, the standard grades have greater tenacity and corrosion resistance in the weld-affected zone. These have the proper amount of steel and a better yield strength than austenitic stainless steel. They also have the right amount of nickel. The resulting coils, sheets, and sheets exhibit good corrosion and mechanical resistance. The alloying chemistry of these enhances the mechanical and physical properties of these. It is more corrosion-resistant than common grades. It is feasible for them to endure prolonged exposure to greater temperatures in lowering environments. These show increased corrosion fatigue even in conditions with higher concentrations. These perform the same function as pitting and crevice corrosion issues. These are produced using hot and cold forming procedures and metal treatment techniques. After the hot working stage, the annealing treatment is indicated.

Duplex Steel S32205 Sheets, Plates & Coils Specifications

Specifications : ASTM A240 / ASME SA240
Standards : ASTM, ASME and API
Thickness of Sheets (Cold Rolled): Ranging from 0.3 mm to 6 mm
Thickness of Plates (Hot Rolled) : Ranging from 3.0 mm to 20 mm
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Thickness : 0.01~200mm
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface and Finish : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
Form : Perforated Sheet, Chequered Plate, Flats, Shim Sheet, Foils, Blank (Circle), Ring (Flange) & Angle, Coils, Channel, Strip, etc.

Duplex Steel S32205 Sheets, Plates & Coils Equivalent Grades

Duplex Steel UNS S32205

Duplex Steel S32205 Sheets, Plates & Coils Chemical Composition

Grade Ni Cr N C Mn P S Si Mo Fe
Duplex Steel UNS S32205
4.50 – 6.50
21.0 – 23.0
0.08 – 0.20
0.030 max.
2.00 max.
0.030 max.
0.020 max.
1.00 max.
2.50 – 3.50
63.54 min

Mechanical Properties of Duplex Steel S32205 Sheets, Plates & Coils

Grade Density Melting Point Tensile Strength Yield Strength Elongation
Duplex Steel UNS S32205
7.8 g/cm3
1440 °C (2625 °F)
Psi – 90000 , MPa – 620
Psi – 65000 , MPa – 450
30 %

Other Products & Grade

error: Content is protected !!
Scroll to Top