Home Stainless Steel Sheets, Plates & CoilsStainless Steel 317/317L Sheets, Plates & Coils

Stainless Steel 317/317L Sheets, Plates & Coils

Stainless Steel 317/317L Sheets Plates Coils

Shree Viratra Enterprises is one of India’s leading manufacturers of premium Stainless Steel 317/317L Sheets, Plates, and Coils used in numerous industries. Austenitic stainless steel, also referred to as SS 317/317L Plates, contains molybdenum. These SS 317/317L Welded Plates exhibit greater corrosion resistance than SS 304 Welded Sheets and SS 317/317L Welded Plates. Additionally, it possesses up to 316 corrosion resistance, better general and localised corrosion, and outstanding strength. These plates and sheets, also known as UNS S31700/UNS S31703, are used in a wide range of industries, including pulp and paper, chemical process vessels, and condensers in power production. 

Specification of Stainless Steel 317/317L Sheets, Plates, Coils

Specifications : ASTM A240 / ASME SA240

Dimensions : ASTM, ASME, and API

Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc

Thickness: 4mm-100mm

Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

Surface Finish : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hairline, sand blast, Brush, etching, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) etc

Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

Equivalent Grades of Stainless Steel 317/317L Sheets, Plates and Coils

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
SS 317
S31700
1.4449
-
-
SUS 317
-
-
SS 317L
S31703
1.4438
-
X2CrNiMo18-15-4
SUS 317L
-
-

317/317L Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 317
0.08 max
2.0 max
1.0 max
0.045 max
0.030 max
18.00 - 20.00
3.00 - 4.00
11.00 - 15.00
57.845 min
SS 317L
0.035 max
2.0 max
1.0 max
0.045 max
0.030 max
18.00 - 20.00
3.00 - 4.00
11.00 - 15.00
57.89 min

Stainless Steel 317/317L Sheets, Plate, Coils Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3
1400 °C (2550 °F)
Psi – 75000 , MPa – 515
Psi – 30000 , MPa – 205
35 %

Other Products & Grade

error: Content is protected !!
Scroll to Top