Home Titanium Products – CP Titanium Grade 7 Round Bars

CP Titanium Grade 7 Round Bars

CP Titanium Grade 7 Round Bars

The mechanical and physical characteristics of CP Titanium Grade 7 Round Bars are identical to those of the standard grades. These bars are very corrosion resistant, especially in acidic conditions, and have good fabrication and welding qualities. These bars reach the same degree of resistance capability, weldability, and flexibility as the regular version. Grade 7 is valuable for industrial applications because of a minor variation in the composition of the alloying components. The palladium content in this grade is relatively low. In particular, in acidic settings, this component increases corrosion resistance. It is one of the top grades for corrosion resistance among all the titanium grades. The only sector that uses these bars is the chemical processing sector. In the chemical processing industries, all the machine parts and equipment are introduced with chemicals, where acids impact the basic structure. As a result, earlier industries and equipment were built with the capacity to withstand acid attacks over extended periods. These bars are ideal for critical and demanding applications because of their distinctive composition of mechanical and physical qualities. These bars are stronger and more structurally effective. These exhibit excellent resistance to saltwater, chlorides, and oxidizing conditions.

CP Titanium Grade 7 Round Bars Specifications

Specifications :ASTM B348 / ASME SB348
Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Range : 3.17 MM TO 350 MM DIA
Length : 1 to 6 Meters, Custom Cut Lengths
Round Bars : Outside Diameter in the range of 4mm to 500mm
Bright Bars : Outside Diameter in the range of 4mm to 100mm
Hex Bars : 18mm – 57mm (11/16″ to 2-3/4″)
Square Bars : 18mm – 47mm (11/16″ to 1-3/4″)
Form : Round, Square, Hex (A/F), Rectangle, Flat, Billet, Ingot, Forging Etc.

CP Titanium Grade 7 Round Bars Equivalent Grades

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Titanium Gr 7
R52400
3.7235
-
-
-
-
-

CP Titanium Grade 7 Round Bars Chemical Composition

Grade C Ti N Fe H O PD Al
Titanium Gr 7
0.10 max
-
0.03 max
0.30 max
0.015 max
0.25 max
0.12 - 0.25
-

Mechanical Properties of CP Titanium Grade 7 Round Bars

Grade Tensile strength, min (Mpa) Yield strength, 0,2% Offset, min (Mpa) Elongation (min, %) Reduction of Area, min, % Hardness * Interpolated
Titanium Gr 7
345,00
275,00
20
30,00
Rb80

Other Products & Grade

error: Content is protected !!
Scroll to Top